跳转到主要内容

什么是追踪止损功能,它们是如何工作的?

Cryptohopper 的追踪功能可自动执行追踪止损、止盈和止损卖空等交易操作,优化你的策略。

Pete Darby avatar
作者:Pete Darby
本周更新

Cryptohopper追踪功能展示了用机器人交易有多方便。当你的机器人处于“追踪”状态时,它会自动跟随价格并等待某个动作。这些动作可能包括在价格下跌时调整止盈,在价格上涨时下单买入,或者在持仓处于空头时回购。我们称这些为:追踪止损追踪止盈 & 追踪做空

追踪止损

追踪止损是我们目前最受欢迎的功能,几乎适用于所有类型的交易者

追踪止损会在价格上涨时自动调整你的止损位。只要价格再次下跌,你的TSL(追踪止损)就会触发并卖出你的持仓。这是跟随上涨趋势并防止过早卖出的理想方式。手动交易者、半自动交易者和全自动交易者都会使用这个功能。

Line graph illustrating how Trailing Stop-Loss (TSL) works. The chart shows an upward price movement (blue line) with a trailing stop-loss line (red line) following below it at a set percentage. As the price rises, the TSL line moves up in parallel, and when the price eventually drops, it intersects with the TSL line, marking the sell point. Arrows and annotations highlight how the TSL adjusts upward with price increases but remains fixed when price decreases.

你可以在你的基础配置配置池中配置你的追踪止损,或者直接在高级视图中添加到你的订单。

Animated screenshot demonstrating the three ways to set up Trailing Stop-Loss in Cryptohopper: first highlighting the TSL settings in Base Configuration, then showing the Config Pool settings, and finally pointing to the TSL option in Advanced View when placing an order. Each location is highlighted sequentially with arrows or indicators showing where to click.

TSL有两个关键设置。追踪止损百分比决定了价格需要下跌多少才会触发TSL卖出持仓,而激活追踪止损于则决定了TSL何时开始追踪价格。它可以从一开始的0.01%“利润”开始,或者只在持仓达到一定百分比的利润后才开始。


你还可以配置你的交易程序是否只能使用追踪止损来卖出持仓(将忽略止损/止盈),是否只能在持仓盈利时卖出,以及卖出订单未能成交时是否可以重试。

追踪止盈

当你买入时,你永远不知道是否买在了最低点。这是不可能知道的,但你可以寻求交易机器人的帮助!

使用追踪止盈(TSB)来延迟你的买入并追踪价格。TSB将持续监控价格下跌,直到价格开始上涨。当价格上涨时,它将触发买入订单,搞定!你可以在你的基础配置配置池中配置追踪止盈,它将总是在你的交易程序收到交易信号或其交易策略发出买入信号之前使用它。

Line graph illustrating how Trailing Stop-Buy (TSB) works. The graph shows a downward price movement (turquoise line) with multiple 'Order adjusted down' points marked along the descent. At each point, the TSB adjusts the potential buy price lower, following the declining price. The graph ends with a 'Stop buy' point where the price begins to rise, triggering the purchase. The visualization demonstrates how TSB helps catch better entry points by following the price down and buying when it reverses upward.

你也可以将其应用于手动订单。只需前往高级视图,在下单时进行配置。TSB有一个重要参数,那就是追踪买入百分比。

Screenshot of Cryptohopper's Advanced View trading interface showing a price chart and order placement panel. The interface demonstrates where to set up a Trailing Stop-Buy (TSB) for manual orders, with the TSB percentage input field highlighted. The screen includes a candlestick chart in the center, order book on the right, and trading parameters on the left including where to enter the trailing buy percentage.

这将决定价格需要上涨多少才能最终执行买入订单。

追踪做空

追踪做空(TSS)几乎与TSB相同。首先,需要知道Cryptohopper的做空方式与传统做空不同。

我们的做空类似于回购功能。当你预期某个持仓的价格会下跌时,你可以启动做空,这些资金将被预留下来以更低的价格回购相同数量的币。唯一不同的是,它会追踪持仓下跌了多少以及你“节省”了多少“损失”!当你认为已经触底时,你就停止做空。你的机器人将回购该持仓,从而保护你免受损失,并且你应该会更快地获利。

追踪做空将自动化你的交易程序启动做空以及何时回购该持仓的部分。你可以将其用作传统止损的替代方案。

Line graph demonstrating how Trailing Stop-Short (TSS) works in shorting. The turquoise line shows price movement starting from 'Start of short' at the top, with multiple 'Order adjusted down' points marked as the price falls. A dashed line indicates the initial arm percentage where shorting begins, and the distance between the final 'Stop buy' point and the start shows the profit margin. The graph illustrates how TSS follows the price down, adjusting the short position, and closes the position when the price reverses upward by the specified trailing percentage.

追踪做空有很多设置,但其中两个至关重要。第一个是激活追踪做空于。这决定了在多少损失时应启动做空。

第二个是追踪做空百分比。这决定了价格需要再次上涨多少才会停止做空并回购该持仓。


这是否解答了您的问题?